Extender
  • Extender Manual
  • Introduction
    • Safety Precautions
    • Specifications
    • Regulatory Compliance
    • What's in the box
    • External features
    • System requirements
  • Getting started
    • Syncing real-time clock
    • Updating firmware
    • Formatting SD Card
  • Modes of operation
    • Power only mode and Trigger Input
    • SD card recording mode
    • Pass-through mode
    • USB drive mode
  • Extender Details
    • Extender Button Functionality
    • Extender LED Functionality
    • Extender Charging
  • Hardware Triggering
    • Trigger Input & Cable
    • Example 1: 1s Pulses
    • Example 2: Serial Triggering
    • Example 3: MATLAB
  • Data Access
    • Downloading recordings
    • Decrypting recordings
    • Exported data format
  • Troubleshooting
    • Hardware Reset
Powered by GitBook
On this page
  1. Introduction

Safety Precautions

  • Extender is a consumer product, it is not intended to use be used for in-patient health care or in hazardous environments.

  • Extender is powered by a Lithium-Polymer battery that is rated for operation in <45C environments. It is not user replaceable, please contact support if you suspect you have a faulty battery.

  • WARNING: Do not open the enclosure. Doing so will void the warranty and can damage the headset.

  • Extender features a 2.5kV isolation barrier. Safety precautions have been taken to ensure this isolation barrier but any modification to the case will mitigate the safety.

PreviousIntroductionNextSpecifications

Last updated 6 years ago