EPOC Flex User Manual
  • EPOC FLEX User Manual
  • EPOC Flex
    • Introduction
    • Technical Specifications
    • Safety Precautions
    • Regulatory Compliance
    • Package Contents
    • Assembly Quick Start
  • Controller
    • Controller Details
    • Charging and LED Indicators
  • Electrodes
    • Example Sensor Placement (Montage)
    • Gel Sensors
    • Saline Sensors
  • Cap
    • EPOC Flex Cap
    • Choosing the Cap Size
  • Setup
    • Inserting the Sensors into the Cap
    • Inserting silicon skirts onto Sensors
    • Placing the Control Box
    • Positioning the Control Box
    • Working with Wires
    • Plugging the Cables into the Control Box
    • Custom Sensor Wiring
    • Gel Achieving high signal quality
  • Cleaning & Troubleshooting
    • Cleaning Gel Sensors & Cap
    • Storage
    • Troubleshooting
Powered by GitBook
On this page
  1. Setup

Placing the Control Box

PreviousInserting silicon skirts onto SensorsNextPositioning the Control Box

Last updated 5 years ago

Place the control box in either the rear head position or the top position. The top position is recommended for those who research on people where headrests are required in a chair (in wheelchairs, for example), or in studies where people are lying down (sleep studies).

With the EMOTIV logo facing outwards, stretch the fabric into the groove around the circular part of the control box securing the box in place.

EPOC Flex Controller Fitted into cap
Positioning