EPOC X User Manual
  • EPOC X
  • Warranties and Copyright
  • Regulatory compliance
  • Introduction
    • Introduction to EPOC X
      • Coverage
    • Application compatibility
    • Technical specifications
    • Safety precautions
  • Getting started
    • Package contents
    • Charging your EPOC X
      • Charging behaviour
    • Turning your headset on
    • Hydrating the sensor felts
      • Further saline solution
    • Fitting the sensor felts
    • Changing reference sensor location
    • Connecting your EPOC X to a device
      • Connecting your EPOC X using the USB receiver dongle
        • USB receiver dongle behaviour
      • Connecting your EPOC X using Bluetooth Low Energy
    • Fitting your EPOC X
      • How to achieve the best contact quality
  • Storing your EPOC X
    • Storing your EPOC X when not in use
  • Support
    • Firmware
    • EMOTIV Support
Powered by GitBook
On this page
  1. Getting started
  2. Connecting your EPOC X to a device

Connecting your EPOC X using Bluetooth Low Energy

Mac

  1. Turn on your headset

  2. Turn on Bluetooth on your Mac

  3. Open your chosen EMOTIV application and find the device list at the top of the screen

  4. Find your headset on the device list

  5. Click on ‘Connect’ next to your headset on the device list

PC

  1. Turn on your headset

  2. Turn on Bluetooth on your PC. This can be found in Settings

  3. Next, click on Add Bluetooth or other device

  4. Your headset will appear on the device list. Click on Connect next to your headset.

  5. Open your chosen EMOTIV application and find the device list at the top of the screen

  6. Find your headset on the device list

  7. Click on ‘Connect’ next to your headset on the device list

For further information on setting up the connection with your chosen EMOTIV application, please refer to the relevant user manual.

PreviousUSB receiver dongle behaviourNextFitting your EPOC X

Last updated 5 years ago