Charging

Plug the cable into the Insight (see photo below) ensuring the connector is fully inserted. Attach the cable to an active USB port on your PC or charger. There is a red and green LED located below the power button which will light orange when the charging and green when complete.

Note the device requires 5V supply and it draws a maximum of 0.5 A from the charge port. If it is plugged into a USB port on your PC, the Insight will check for the maximum available current from the port up to a limit of 0.5 A. Note that if the port does not support extended power mode, Insight will draw 0.1 A and it will charge much more slowly. Try a different USB port if Insight takes more than 2 hours to reach full charge.

PreviousObtaining Good Contact Quality

Last updated 5 years ago