Once you have fitted all the sensors in place we recommend that you use the included tagger pins and tagger tool to tidy up the wiring. Or we recommend that you place a cap over the top to stop these wires catching. If your research involves minimising motion artifacts you should keep the excess wire secured. We have included two black wire wraps and a tagger tool and clothing tag pins to tie down your cables. This will help reduce wire movement being picked up by the sensor.
If you need to tidy up your wires, use the black cable ties and the needle provided to lock your cables down and prevent any unwanted movement. This is something similar to sewing the cables into the material.
On the other side of the cables if you want to tie down: